| HART Products |
Arcom’s HART products are high performance units with
multi-tasking operating systems for use in process control and SCADA applications. The
units are supplied standard with a MODBUS® serial communications driver and other
protocol drivers are available dependent upon the user application. All of our HART
Products support the following
- Real-Time Process Variable Acquisition
- Transmitter-Specific Command Support
- RS232 RTS/CTS Handshaking
- Supports Standard HART Command Set
Please find the product to fit your
application below: |
|
| HtNode |
|
|
|
| Director
Series II & IV |
 |
The Director is a product built-on
communication connectivity through the use of TCP/IP or a full range of various protocols.
Each Director is standard with (4) communication ports and has an Ethernet option.
For I/O, the Director is built on the industry standard PC/104 bus to which I/O
modules are added per specific application. The Director comes in two separate
modules, the Series II and the Series IV. The Series II supports (1)
board expansion and the Series IV supports (3). With the use of our HBI HART
interface PC/104 module, the Series II supports up to 2 HART port and the Series IV can
support op to 6 channels with each channel supporting up to 15 smart devices. Click here for more detailed
information |
|
APEX /
Director Manual Set |
|
|
| APEX |
 |
The APEX is an RTU built-on
extensive I/O capability and communication connectivity through the use of TCP/IP or a
full range of various protocols. Each APEX is standard with (6) communication ports
and has an Ethernet option. For I/O, the APEX is built on the industry standard
PC/104 bus to which I/O modules are added per specific application. With the use of our
HBI HART interface PC/104 module, the APEX can supports up to 14 HART channels with each
channel supporting up to 15 smart devices. Click here for more detailed information |
|
APEX /
Director Manual Set |
|
|
| M1 RTU |
|
|
Year 2000
Readiness Disclosure
M1 RTU 